| Note Legend |
| 1 |
Requires modification to the OEM steering knuckle |
| 2 |
Requires modification to the OEM steering knuckle and use of included
custom hubs |
| 3 |
1995 E36 M3 models require minor modification to the lower control arm
outboard of the ball joint |
| 4 |
This system consists of 2-piece disc assemblies which directly replace
the OEM discs |
| 5 |
Requires significant modification to the OEM knuckle |
| 6 |
Not for road use. This system eliminates the
parking/emergency brake function if not used in conjunction with parking
brake kit |
| 7 |
Not for road use. This system eliminates the parking/emergency brake
function |
| 8 |
This system is to be used ONLY with OEM rear brakes, not to be used
with the rear upgrade kit |
| 9 |
Special order only |
| 10 |
This system does not include brake lines, the OEM brake lines are
retained |
| 11 |
This system can be fitted to CCM-equipped
models, however the original hand-brake calipers cannot be used. The hand-brake calipers from an iron
brake model must be obtained and used instead. |
| 12 |
This system includes oversized 2-piece disc
assemblies, brackets, and hardware to be used with the original calipers. |
| 13 |
For use only with 405mm M6 front brake system |
| 14 |
For applications for PCCB equipped models,
please contact your distributor |
| 15 |
Caliper upgrade only. This system includes calipers,
brackets, brake lines and hardware to be used in conjunction with the
original discs. |
| 16 |
This system consists of 2-piece disc assemblies
which directly replace the OEM discs. Slot pattern differs from standard GT 8-slot pattern. |
| 17 |
This system consists of 2-piece disc assemblies
and special brake pads which directly replace the OEM discs and pads. Slot pattern differs from standard GT
8-slot pattern. |
| 18 |
This system is to be used ONLY with the
1J1/2.9005A front kit, it is not compatible with any others. |
| 19 |
The crossection and A, B, C dimensions reflect
the dimensions of the 4-piston caliper and not the hand-brake caliper. The maximum radial dimension occurs at
the relocated hand-brake caliper, so this must be factored in when choosing a
wheel to fit the complete system. |
General Notes - Many of the GT systems require modification
to, or removal of the OEM dust shield or backing plate.
- Add 1,2,3,4 to end of part number for caliper color. 1=black, 2=red, 3=silver, 4=gold
(where applicable), 5=yellow (where applicable)
- Add R to end of part number for GT-R caliper (higher price applies). Applicable to M4 and M6 kits, i.e.
with M, N, or P second digit.
- Please note that the caliper clearance required for the GT-R M6
caliper differs from that required for the GT M6. Contact your dealer or distributorfor the details. |
Find us on Facebook
